StarTech.com 2 Port Gbit Ethernet PCIe Network Card
Product Code:
8STST2000PEXPSE
Pack Of
1
The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to 25.5W of power each, combining a network data connection and power on a single cable, for less clutter and convenient installations in remote locations.
This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing Equipment (PSE) device, and can deliver 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and wireless access points.
Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL).
The ST2000PEXPSE PoE NIC is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- General
- The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to 25.5W of power each, combining a network data connection and power on a single cable, for less clutter and convenient installations in remote locations.
This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing Equipment (PSE) device, and can deliver 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and wireless access points.
Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL).
The ST2000PEXPSE PoE NIC is backed by a StarTech.com 2-year warranty and free lifetime technical support.
| Connector Type | 1 x PCI Express x1 Male |
| External Ports | 2 x RJ-45 Female |
| Internal Ports | 1 x LP4 (4 pin; Large Drive Power) Male 1 x SATA Power (15 pin) Plug |
| Built-in SATA and LP4 Molex power connector |
| Crossover Detection & Auto-Correction (Auto MDIX) |
| Dual 10/100/1000 Mbps PoE RJ45 ports |
| Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Includes full and low profile/half-height installation brackets |
| Jumbo Frame support |
| On-chip 48 KB Big Transmit/Receive Buffer Support |
| Power Sourcing Equipment (PSE) design, provides data and up to 25.5W of power on each port |
| Supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control |
| Supports IEEE 802.3at (Type 1, 2) Power over Ethernet standard |
| Unique surge protection design |
×
Find us at
Cockersdale Works
Whitehall Rd
Drighlington, Bradford BD11 1NQ, United Kingdom
Telephone 0113 285 4695
Email us:Sales@richardwild.co.uk